HNS INDMUX-64 Interface
The HNS INDMUX-64 interface allow the connection of HB and LVDT
type inductive measuring probes to the computer. Using this interface you can support the major
types of inductive probes in your measuring application, but we can configure the
interface also for probe type that are specified by you.
The interface has master and slave devices. Master device is connected to
the USB port of the computer and the slaves are connected to the
master device through the internal CAN bus. All devices have 4 measuring channels, and maximum 15 slaves can be connected to a master device, so
maximum 64 measuring channel can be used with one interface system
(64 inductive probes by 1 USB connection).
Attention!
We are searching for OEM suppliers. We offer for them technical support and special construction
for developing and distributing of their own applications - do not hesitate to contact us for details!
Interface System - master/slave, maximum 64 inductive probes
Main features of the interface
- configurable for 4, 8, 12, 16, ... 60, 64 measuring channels,
- easy-to-use, compact design
- design with metal case for using in hard industrial environment,
- 24VDC (+/-10%) external power supply (connected to the master, slaves are powered by the internal CAN bus),
- 16 bits A/D conversion, +/-32000 resolution, +/-0,1% accuracy,
- master device has 4 digital inputs (24VDC, 5mA, not isolated),
- master device has 4 digital outputs (24VDC, max. 250mA, not isolated),
- USB 2.0 connection to PC (master device connected to the PC, USB driver creates a virtual COM port, public communications protocol, simple message format),
- slave devices communicate with the master only (CAN 2.0B bus, 1MBaud, maximum length of the CAN bus is ~30m),
- usable in 0..50°C temperature range.
|
Technical data
|
HNS INDMUX-64
master
|
HNS INDMUX-64
slave
|
|
Name
|
master (controller) device for the inductive probe interface
|
slave device for the inductive probe interface
|
|
Type of gauges can be connected
|
HB and LVDT*
|
HB and LVDT*
|
|
Number of probes can be connected
|
4
|
4
|
|
Digital input
|
4
|
-
|
|
Digital output
|
4
|
-
|
Connection
to the computer
|
USB 2.0
|
-
|
Cable
to the computer
|
USB
normal, 1.80m
|
-
|
|
Driver
|
FTDI CDM
USB - virtual RS232 port
|
-
|
Reading rate
master-PC communication
|
~10 measurements/s
not depend from number of devices
|
-
|
|
Design
|
metal case
with with fixing lug
|
metal case
with with fixing lug
|
Size without connectors [mm]
(w x h x d)
|
105 x 133 x 45
|
105 x 133 x 45
|
|
Power
|
24VDC
external power supply
|
-
powered from the master device
|
|
Accessories
|
24VDC power supply, USB cable
|
CAN cable, CAN bus terminal unit
|
*: currently supported probes are: TESTART RED CROWN LVDT, TESSA HB and MAHR LVDT - other types can be configured,
please specify type of your probes if you are interested in interface!
The driver of interface makes a virtual COM port in the course of the installation. After installation, the interface is usable as a simple
serial device.
Interfaces has a simple, public communication protocol. The description of the protocol can be found and
download among the references on the right side.
Prices
|
Quantity [pcs]
|
HNS INDMUX-64
master
|
HNS INDMUX-64
slave
|
|
1 - 3
|
250.000,- HUF/pcs
|
220.000,- HUF/pcs
|
|
4 - 6
|
237.200,- HUF/pcs
|
208.000,- HUF/pcs
|
|
7 - 10
|
224.500,- HUF/pcs
|
198.400,- HUF/pcs
|
|
10+
|
214.100,- HUF/pcs
|
188.400,- HUF/pcs
|
The external power supply, the USB cable and the standart (~30cm length) CAN cables are in delivery range.
The prices above are informative only, please ask for our offer!
Software support
Following of our softwares support the usage of HNS INDMUX-64 intervface.
- HNS SPC program for building full-range, company-level SPC systems.
- Special measuring and data collecting programs for measuring equipment with Digimatic gauges.
>>
News
26 October 2011
We installed the first HNS AKS - Failure Monitoring System for an automotive part assembling cell and
we are working on next cells now.
We create our first on-line production and failure data collecting and monitoring system by integrating the HNS AKS and the HNS SPC systems.
25 October 2011
New version of HNS SPC is available!
We released V5.5.22 version of HNS SPC software.
Our registered users can download it now.
If you are not registered user download the
trial of HNS SPC.
24 October 2011
New product is available!
We released the HNS ANDON Call System.
This is a simple shopfloor level LEAN tool for assembly lines.
We are searching for resellers!
7 October 2011
We released the
HNS SPC V5.5.21 version.
10 September 2011
We released the
HNS SPC V5.5.20 version.
9 August 2011
We released the
HNS SPC V5.5.19 version.
8 June 2011
We released the
HNS SPC V5.5.18 version.
25 March 2011
We released the
HNS SPC V5.5.17 version.
13 February 2011
We released the
HNS SPC V5.5.16 version.
13 May 2010
We released the
HNS SPC V5.5.15 version.
18 January 2010
In the last issue of the
Műszaki Magazin, the
last part of our article series about the SPC is published, with the title
'The benefits of the SPC (second part)'.
The article will be published also on the
LeanDesign.hu.
20 November 2009
The HNS SPCea is Windows 7 Compatible. It is passed on Windows 7 Compatibility Test today.
Microsoft Windows 7 Compatibility Lab, Train4Business Windows Presentation Foundation - Győr
10 November 2009
In the current issue of the
Műszaki Magazin, the
third part of our article series is published, with the title
'The benefits of the SPC'.
The article will be published also on the
LeanDesign.hu.
12 October 2009
In the current issue of the
Műszaki Magazin, the
second part of our three-part article series is published, with the title
'Roles and Information' in the SPC systems.
The article can be read also on the
LeanDesign.hu.
16 September 2009
In the current issue of the
Műszaki Magazin, the
first part of our three-part article series is published, with the title
'Why SPC?'.
The article can be read also on the
LeanDesign.hu.
29 August 2009
Borsodi Műhely Ltd., Jankovits Hidraulics Ltd.,
HNS Technical Development Co. Ltd. located in the Industrial Park of Győr
and Delta-Tech Ltd. located in Balassagyarmat have established the VisioTech Hungary
Machinery Manufacturing Cluster.
>>
www.visiotechhungary.eu
28 July 2009
HNS SPCea, the basic-level
statistical process and quality control program is published.
>> Download and use the
free version of the program!